VI
PC tip changer PCA-21
Cap tip automatic changer apparatus
ATC ” PC tip changer “
The original cap tip detaching method is possible for the reliable changing of cap tip and shank without any damage.
The upper and lower simultaneous changing method can be induced drastic time saving.
It is applicable to a wide range of welding process.
It is possible in changing of upper and lower cap tips simultaneously or independently corresponding to the specification of a gun type.
| Standard outside dimension | 564.5(D)×395(W)×820～982(H) mm | |
| Weight | 33kg | |
| Control power source | DC24V | |
| Changer unit | Usage fluid | Compressed air (0.4～0.7MPa) |
| Pawl’s opening strength | 1,000kgf (at the 0.4MPa) | |
| Minimum opening space of a pawl | 4.0mm | |
| Pawl’s max opening width | 9.6mm | |
| Floating function | Standard loading (up and down/right and left 2mm) | |
| Setting abnormal sensor | Standard loading | |
| Magazine unit | Tips holding pcs | up and down each 16 pieces |
| Floating function | Standard loading (up and down/right and left 2mm , back and forth 8mm) | |
| Sensor for non tips check | Standard loading | |
| Tip installation recognition sensor | Standard loading | |
| Installation basement | Standard loading | |
| Tip retrieve water tank | Standard loading | |
| Corresponding model | Welding gun (Drive) | Air gun, servo gun |
| Welding gun (Type) | C type gun, X type gun, Stationary welding machine | |
| Applicable cap tip/shank etc. | Tip diameter/Overall length | φ13x 20L φ16x23L・25L etc |
| Tip shape | A type, R type, E type, P type, F type etc | |
| Tip | New tip, Recycled tip | |
| Shank shape | Straight, triangular holder, arm etc. | |
※ Change an outside dimension by a model.
